Guides

58 guides

Exporting · 3 of 8

Adding ebook and print covers

4 min read · checked Oct 30, 2026

The Cover drawer keeps two kinds of cover, because they are different files. An ebook cover is the front alone. A print cover is the whole wrap, with the back, the spine and the front on one sheet. You can add as many of each as you want to try, and choose which one is in use.

The ebook cover

Stores want an ebook cover in a book’s shape, about 1:1.6, and at least 1600 × 2560 pixels. The one in use goes into the EPUB and onto your shelf in Typalog.

  1. Open Cover and choose Add an ebook cover.
  2. Pick a JPEG or PNG image.
  3. If the picture is already the right shape and size, it is added straight away.
  4. If not, Frame your cover opens. Drag the picture to place it and use the slider to zoom. What is inside the frame becomes the cover.
  5. Choose Use this crop, or Use the whole image to keep the picture in its own shape.

While you frame, the window shows the size of your picture and of the cover it will make. If the cover would be smaller than 1600 × 2560, it says so; zoom out or use a larger picture. A cover is never enlarged, so a small picture stays small.

Under each cover the drawer shows its size and a note: Meets the retailer minimum, or what is off, such as Under 1600 × 2560 or Ratio should be near 1:1.6.

The print cover

You upload the print cover to the printer beside the interior PDF. Its size depends on your page count, because the spine gets wider as the book gets longer. The drawer works this out for you.

  • Printed on: White paper or Cream paper. Cream is a little thicker, so it makes a wider spine.
  • Pages: the page count of the print edition. It says estimated when the pages have not been laid out yet.
  • Spine: the spine’s width.
  • Whole sheet: the size of the wrap in inches, and in pixels at 300 dpi.
  • Bleed: 0.125 in on every side, for artwork that runs off the edge.

Under 79 pages, the spine is too thin for text, and the drawer tells you to leave it plain.

Template (PNG) and Template (SVG) download a guide the exact size of your wrap, marked with the back, the spine, the front, the bleed, the safe area and a barcode box. Lay your artwork on it in your design tool.

When you add a print cover, the drawer checks it against the sheet: Matches the sheet for this page count, or the size the sheet should be.

The spine is worked out with Amazon KDP’s paper thickness. IngramSpark’s is a little different. Once your page count is final, check the size on the store’s own cover calculator.

The barcode

With a valid ISBN-13 in Book, the drawer draws the barcode a printer wants on the back cover. It fits the template’s barcode box.

  • Price beside it: No price, or a currency (US dollars, Pounds, Canadian dollars or Australian dollars). Choose a currency and type the Price.
  • Barcode (PNG) and Barcode (SVG) download it.

With no ISBN, or one that fails its check digit, the drawer says so and offers Open Book. If you have no ISBN, Amazon KDP can add a barcode for you.

Choosing and removing covers

  • Each cover has a name you can change by typing over it.
  • Use makes a cover the one in use. The one in use is marked In use.
  • Add another adds more of the same kind.
  • Remove takes a cover out of the book after you confirm. If it was in use, the next of its kind takes its place.

Whether the file opens with the cover

In Export, Front cover as the first page decides whether the ebook cover opens the file. It starts off for Kindle, because Amazon adds the cover from your listing and would show it twice, and off for KDP Print and IngramSpark, because they take the cover as a separate file and reject an interior that has one. For other ebooks it starts on. You can change it either way.

Did this help? Not quite, ask us